Listening - Phonak Profilo WL-Kit DM Mode D'emploi

2 How to use the Profilo kit
Activating the microphone
u Press the In-line PTT, the 2-key PTT, or use the PTT function from the wireless PTT paired
to the junction-box to activate the microphone (figure 8).
Wireless PTT Profilo WL-kit junction-box
PTT button In-line PTT
Tone board or volume control
Figure 8
Notes
u The wireless PTT included in the Profilo WL-kit is paired with the junction-box at the
factory. It is possible to pair a new wireless PTT (see Covert Wireless PTT AC user guide) for
both Profilo WL-kit and Profilo LM-kit.
u For more information regarding the wireless PTT, please check the Covert Wireless PTT AC
user guide or contact your local representative.
16
Profilo LM-kit junction-box 2-key PTT
PTT button
Tone board or inactive
2 How to use the Profilo kit

Listening

u Place a Profilo Nano earpiece in the ear (figure 9). For more information, please see the
Profilo Nano user guide or contact your local representative. The audio from the radio is
transmitted to the earpiece via the neck-loop (figure 6).
Figure 9
Advices
Profilo WL wirings and Profilo LM wirings can only be used with a Profilo Nano earpiece.
The transmission range is very small and remains in the vicinity of the end-user's head.
(No risk of message interception.) (figure 6).
The quick-release safety disconnects should be closed correctly to transmit the signal – there
should be no gap between the quick-release safety disconnects (figure 7).
No pairing between the Profilo loop and the Profilo Nano earpiece is needed (any Profilo Nano
earpiece will work with any Profilo loop).
17