Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
E-MOTIKA
84
Maintenance Warning Setting
The display will prompt maintenance necessity based on such information as the accumulated
riding distance and the battery charge cycles.
•
When the accumulated total riding distance exceeds 5,000 km the display will show the
symbol
flash for 4 seconds, indicating that maintenance is necessary;
•
When the number of battery charge cycles exceeds 100 times, the display will show
the symbol
indicating that maintenance is necessary.
The maintenance alert function can be disabled: settings - maintenance alert (MA) - maintenance
alert (MA) - 0.
6.5.9 Password Setting
When the speed field displays PSd, it is a prompt to enter a password. Press
four-number password (using digits 0 to 9). Briefly press
of the password. The default password is "0512". Briefly press
set password is wrong, the system automatically returns to the previous interface. If the set pass-
word is correct, the system will switch to the setting of the wheel diameter.
Note: once modified, save the new password carefully. The company is not responsible in case
the password is forgotten.
6.5.10 Wheel Diameter Selection
When the speed position displays Wd, press
20 / 22 / 24 / 26 / 700c / 28 / 29.
The measurements are in inches. A wrong wheel diameter can lead to speed anomalies.
After this setting, briefly press
. When the display is started up, the sign for accumulated riding distance will
. When the display is started up, the sign for battery will flash for 4 seconds,
(< 0.3 seconds) to enter the setting interface of speed limit.
to switch between the single digits
to confirm your setting. If the
/
to select the correct wheel diameter: 16 / 18 /
/
to set the
Publicité
Table des Matières
