INSTRUCTION MANUAL
F-
Distance indication: display of the distance depending on the setting.
G-
Level indication: the chosen level 1–5 will be displayed; if there is no numeric display, it
means that there is no assistance (by the motor). If the rider is walking and pushing the
e-bike, will be displayed.
Walk assistance.
H-
I-
Backlight indication.
J-
Distance mode: display of the single-trip distance TRIP and the total distance TOTAL.
K-
Battery level: 10-segment battery indication; the voltage that each segment represents can
be customized.
6.3 Key Definitions
A – up
B – down
C – display backlight
D – on/off
E – mode
6.4 Normal operation
6.4.1 On/Off Switch
Turn on the device. Press and hold
again for 2 seconds to turn off the display. After 5 minutes (time can be set), if the bike is not used,
the display will be automatically turned off.
6.4.2 Assist Mode Selection
In the manual gearshift mode, press the
motor. The lowest level is Level 1, the highest Level 5. When the display is on, the default mode is
Level 1. When there is no numeric mode display, there is no power assistance.
for 2 seconds to turn on the display. Press and hold
or
to choose the desired level of support by the
79