Kasanova E-MOTIKA Manuel D'instruction page 82

E-MOTIKA
82
6.5.3 Data reset
Press twice (interval < 0.3 seconds) – the display enters the Menu state and in the speed
field TC is displayed. If you press , a y will be also displayed. Now all temporary data, e.g.
maximum speed (MAXS), average speed (AVG) and single-trip distance (TRIP) can be cleared.
Briefly press (< 0.3 seconds) to enter the km/mile setting interface.
If the user does not reset the data, the single trip distance and the accumulated total riding time
will be automatically cleared when the accumulated total riding time exceeds 99 hours and 59
minutes.
The data will not be cleared when the display's light-sensitive function is set to 0 or when it is
switched off.
6.5.4 km/mile
When the speed field displays S7, press / to switch between km/h and mph, or to set km
or mile. After this setting, briefly press (< 0.3 seconds) to enter the setting interface of light
sensitivity.
6.5.5 Light Sensitivity
When the speed field displays bL0, use / to choose between 0 and 5. The higher the number
shown, the higher the light sensitivity.
After this setting, briefly press (< 0.3 seconds) to enter the setting interface of backlight bright-
ness.