Application; Setting Up The Compressor - Pari SINUS2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 97
3

APPLICATION

People who assist others in carrying out the therapy must en-
sure that all of the steps described below are carried out
correctly.

3.1 Setting up the compressor

The room in which the compressor is operated must satisfy
certain requirements [see: During operation, page 34]. Fur-
thermore, please note the following warnings before setting the
compressor up:
WARNING
Risk of fire due to a short circuit
A short circuit in the compressor can cause a fire. In order to
reduce the risk of fire in such an event, follow the instructions
below:
• Do not operate the compressor close to readily flammable
objects such as curtains, tablecloths, or paper.
• Do not operate the compressor in areas where there is a
risk of explosion or in the presence of oxidising gases
(e.g., oxygen, nitrous oxide, flammable anaesthetics).
CAUTION
Quality of treatment impaired by electromagnetic
interference
Electrical devices can cause electromagnetic interference.
Interference can impair the function of the devices and thus
also the effectiveness of the treatment.
• Do not place the PARI device immediately beside or on
top of other devices.
• Keep at a minimum distance of 30 cm from portable wire-
less communication devices (including accessories there-
for, such as antenna cables or external antennas).
• If the PARI device has to be placed immediately beside or
on top of other devices for operation, all devices must be
monitored to ensure that they are working properly.
– 16 –

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lc sprint sinus128023

Table des Matières