Pari SINUS2 Mode D'emploi page 72

If several inhalation solutions are to be used one after the
other:
• Rinse the nebuliser out with drinking water between the indi-
vidual applications.
• Shake excess water out of the nebuliser.
• Fill the nebuliser with the next inhalation solution as
described.
Connecting the tubes
The PARI SINUS tubing system consists of two identical tubes.
One tube is needed for the compressed air supply, the other
helps to generate the vibration.
To connect the tubing system up fully, proceed as follows:
• Insert the corresponding con-
nector of the unconnected tube
in the vibration adapter.
• Insert the adapter in the
nebuliser upper section.
• Insert the free tubing connect-
ors in the corresponding con-
nectors on the compressor.
Info: The tubing connectors
can be inserted more easily if
they are twisted slightly when
inserting.
– 20 –