2 SPECIFICATION
2.1 Type specification
Designation
8021 Pulse Divider
2.2 Design and measuring principle
Design
The Pulse Divider consists of an electronic
board in a splash-proof IP65 polyamide
enclosure. The device is directly installed
on Bürkert flow sensor 8020 / 8030 Inline.
The output signal and the power supply are
provided via a PG 9 cable gland.
2.3 Dimensions
8021
PULSE DIVIDER TYPE 8021
Cable Entry
PG9
Measuring principle
The Pulse Divider is an interface using the
signal of the flow sensor 8020 / 8030 (with
Hall sensor) to generate a pulse at a
determined flow amount. The amount is
function of the factor K and a multiplicator
coefficient D.
The Pulse Divider type 8021 requires a
power supply of 12...30 VDC, the maximal
frequency of the input signal is 300 Hz.
28 (1.10")
70 (2.76")
90 (3.54")
-13-
Ident-No.
418995P