Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Display of the system's status. Depending on the program selected, various system
Stat:
statuses are monitored. If any problems have occurred, this menu contains all of the
information.
The navigation keys on the parameter level (, ) allow you to select the icons under the
Par:
temperature display and the text line. The parameter selected can now be released for
selection with the down key (enter). The parameter blinks to indicate release. Press one
of the navigation keys to change the value by one increment. Keep the key pressed to
keep the value running. The changed value is adopted when the UP key (return) is
pressed. To prevent unintended changes in parameters, entry in Par is only possible
using the code 32.
The menu contains basic settings to determine additional functions such as the sensor
Men:
type, the system protection functions, function control etc. Use the keys for navigation and
to make changes as usual. The dialogue is only set up via the text line. As the settings in
the menu change the basic features of the control unit, entry is only possible with a code
that only the technician knows.
The settings of the parameters and menu functions ex works can be restored at any time
using the down key (entry) when plugging the unit in. If this occurs, WELOAD will appear in
the display for three seconds.
Changing a value (parameter)
Value
blinks
If a value is to be changed, press the arrow key. This value will then blink and can be set to the
desired value with the navigation keys.
Use the arrow key up to save the value.
Value
blinks
English
Value
blinks
21
Publicité
Table des Matières
