Steba IK 3500 Flex Mode D'emploi page 19

∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Risk of electronic shock! Do not put any sharp objects into
the ventilation slots. Do not use the device if there are cracks in
the glass plate.
∙ Never place empty pots, cutlery or other metallic objects onto
the device. Those objects will get hot! Do not heat cans, they
can explode.
∙ Do not place a sheet of paper or metal foil between the pot or
the pan and the device.
∙ Do not load the glass surface with more than 8kg.
∙ In order to protect the electronic parts, the ventilation
runs for a couple of minutes after the device has been
turned off.
∙ The glass surface can have a residual heat after cook-
ing.
∙ Attention! Do not place hot pots or pans onto the con-
trol panel! Not warranty payments!
∙ Do not use the device if unsupervised. Oil and fat can
catch fire if they get too hot. In case of grease fire unplug
and never extinguish with water! Cover the pot with a lid, plate,
or similar.
∙ Do not place near objects which are affected by magnet. (e.g.
automatic-banking cards).
19