Steba IK 3500 Flex Mode D'emploi page 18

∙ Never place anything on top of the device and do not cov-
er the ventilation slots.
∙ Never immerse the unit in water.
∙ Never use the device after a malfunction, e.g. if it felt down or
has been damaged in any other manner.
∙ The manufacturer is not liable for damage which is occurring
due to the usage of the appliance in a different way as de-
scribed or a mistake in the handling has been made.
∙ To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by a customer service. Only original
spare parts have to be used.
∙ The device gets hot, only transport after it cooled down and
without cookware on top.
∙ Only use the device as described in this manual.
∙ This appliance is intended to be used in household and similar
applications such as:
o staff kitchen areas in shops, offices and others working
environments
o by clients in hotels, motels and other residential type en-
vironments
o bed and breakfast type environments.
∙ Attention! Device gets hot. Danger of burns!
While using the device, the surface can get very hot! Do
not place the appliance on a sensitive surface (e.g.
painted furniture) and keep a distance of at least 70cm to burn-
able materials.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm². A cable drum must always be unwound.
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard. This
device has a power consumption of 3500 watts.
18