Storage; Disposal - Cleanmaxx EV-660-S148 Mode D'emploi

EN
9. Attach the dust container (12) to the motor unit (5): First insert the two locking lugs on
the fl at side of the motor unit (5) into the matching openings in the dust container (12)
and then press the two components together. The dust container (12) must be heard
to engage in place.
Cleaning the Turbo Nozzle
To make it easier to clean, the brush can be removed from the turbo nozzle (7):
1. Press the release button on the turbo nozzle (7) and remove it.
2. On the bottom of the turbo nozzle (7) slide the

Storage

Disposal

Dispose of the packaging material in an environmentally friendly manner so that
it can be recycled.
This article is governed by the European Directive 2012/19/EU on waste electri-
cal and electronic equipment (WEEE). Do not dispose of this device as normal
domestic waste, but rather in an environmentally friendly manner via an offi cially
approved waste disposal company.
The battery should be removed prior to disposal of the device and disposed of
separately from the device. To protect the environment, non-rechargeable and
rechargeable batteries must not be disposed of with regular household waste, but
must be taken to suitable collection points.
Li-Ion
24
3. Flip open the catch (see picture).
4. Take out the brush and remove any contamination.
5. Reinsert the brush: First insert the end with the triangular
recess, then the end with the metal pin.
6. Flip the catch shut and slide the
tion.
1. Insert the cordless vacuum cleaner into the frame (6).
2. Hook the frame (6) into the charging station (23).
3. If necessary, fold back the stem (15) to save space.
4. Connect the charging station (23) to the mains power.
switch in the direction.
switch in the direc-