Operation Of The Extractor Unit; Manually Switching On And Off The Extractor Unit; Boost - ETNA AKI683 Série Mode D'emploi

OPERATION OF THE EXTRACTOR UNIT

Manually switching on and off the extractor unit

1. Touch the extraction key.
▷ The display of the extractor unit lights up.
2. Set the extractor speed level within 3 seconds by touching the slide control (1 to 9).
The extractor unit switches on with the extraction speed that is set.
▷
▷ Set a higher or lower level with the slide control.
3. Set the extractor speed level to '0' to switch off the extractor unit.
4. Switch off the induction hob by touching the on/off key.
In recirculation mode, the extractor unit will operate in follow-up mode for another
20 minutes when the hob is switched off.

Boost

You can use the boost function to extract for max. 6 minutes at the highest level.
1. Touch level P to select the boost function.
'P' shows on the display.
▷
▷ After the maximum boost time the extractor speed level will be reduced to level 9.
In recirculation mode there is no time limit and the boost function stays active.
2. Set the extractor speed level to '0' to switch off the extractor unit.
3. Switch off the induction hob by touching the on/off key.
EN 22