Intended use
5
Intended use
In compressor mode the cooler is suitable for cooling and deep freezing food-
stuffs. In thermoelectric mode the cooler is only suitable for cooling food-
stuffs.
The device is designed for use with:
a 12 V vehicle electrics socket of a car (such as a cigarette lighter), boat or
caravan (see voltage specification on the type plate)
a 230 V AC mains supply
The appliance may also be used for camping use. The appliance shall not to
be exposed to rain.
!
CAUTION! Health hazard!
If you wish to cool medicines, please check if the cooling capacity
of the device is suitable for the medicine in question.
6
Technical description
The hybrid cooler is suitable for portable use. It is equipped with two separate
cooling systems. The device features a Peltier cooling system with heat dis-
charged by a fan, as well as a compressor cooling system. The cooling sys-
tem is non-wearing.
In thermoelectric mode (connection to 12 Vg), it can cool goods down to max.
20 °C below ambient temperature and keep them cool. In compressor mode
(connection to 230 V), it can cool goods down to –15 °C and keep them cool.
In compressor mode, you can use the continuously variable thermostat to set
the temperature within a range from +12 °C to –15 °C.
6.1
Description of the device
No. in
fig. 2, page 2
1
2
3
8
Description
Handle
Ventilation slots
Thermostat
B40 AC/DC
EN