Attaching/Removing The Flash Unit To/From The Camera - Sony HVL-F45RM Mode D'emploi

Attaching/removing the flash unit
to/from the camera
To attach the flash unit
to the camera
1
Turn off the power of
the flash unit.
If your camera is equipped
with a built-in flash, make
sure that the camera flash is
not released.
2
Remove the terminal
protection cap from
the Multi Interface
foot on the flash unit;
and the shoe cap from
the Multi Interface
shoe on the camera.
3
Press and hold the
release button and
rotate the lock lever
away from "LOCK."
14
GB
4
Insert the Multi
Interface foot of the
flash unit into the
Multi Interface shoe
on the camera and
push in the foot all the
way.
5
Rotate the lock lever
toward "LOCK" to
secure the flash unit
on the camera.
To remove the flash
unit from the camera
Turn off the power of the flash
unit first. Press and hold the
release button, rotate the lock
lever away from "LOCK," and
then slide the unit out of the
Multi Interface shoe.
Notes
When you do not intend to use
the flash unit, be sure to attach the
terminal protection cap back to the
Multi Interface foot.