Sony HVL-F45RM Mode D'emploi page 29

• Setting options

[Hz]: 1 Hz - 100 Hz

[TIMES]: 2 - 100, --

[LEVEL]: 1/8 - 1/128
When [TIMES] is set to [--],
the flash unit continuously
fires as many times as
possible with the specified
frequency in multiple flash.
3
Set the shutter speed
and the aperture on
the camera.
The shutter speed should be
at least equal to the number
specified for repetition in
multiple flash (TIMES) divided
by the specified frequency in
multiple flash (Hz).
For example, if the number
for repetition in multiple
flash is specified to "10" and
the frequency in multiple
flash to "5 Hz", set the
shutter speed of the camera
to at least 2 seconds.
4
Make sure that the flash
unit is ready to fire, and
then press the shutter
button to take a photo.
To avoid blurring of images
due to hand movement, it is
recommended that you use
a tripod for multiple flash
photography.
Maximum number for
repetition in multiple flash
Due to the limited battery
capacity, the maximum numbers
that you can specify for
repetition in multiple flash are
shown in the following tables as
guidelines.
GB
29
GB