Mounting The Flash - Sony HVL-F32X Mode D'emploi

Mounting the flash

1
When using the digital still camera which is compatible with
the advanced accessory shoe
Flashing
section
2
1 Turn the rotating knob in the direction of the arrow to loosen.
* Raise the lock pin fully.
2 Insert this unit into the accessory shoe towards the front, with the
flashing section facing forward.
* Be sure that the POWER switch is OFF when inserting.
3 Turn the rotating knob in the direction of the arrow to tighten.
* Lower the lock pin fully. If it is not fully lowered then this unit may
fall down.
* When attaching or removing this unit from the digital still camera,
loosen the rotating knob fully, and raise the lock pin fully.
1
3
Pin Name
Lock pin
The lock pin moves up and
down by turning the
rotating knob.
11-GB