Sony HVL-F45RM Mode D'emploi page 34

Wireless flash
photography (with the
receiver unit)
You can specify another flash
unit attached to the camera or
the radio wireless commander
as the commander unit, and
then use the commander unit to
trigger the flash operation of this
flash unit placed away from the
camera.

 Commander unit (CMD)
 HVL-F45RM
As the commander unit, you
can use this flash unit or a radio
wireless commander.
1
Select wireless (WL)
flash mode on the
camera.
For selecting the flash mode
on the camera, refer to
the operating instructions
supplied with the camera.
34
GB
2
Press the WL button
on this flash unit and
select [RCV].
3
Press the Fn button
and specify the
wireless group for this
flash unit.
4
Attach the mini-stand
to this flash unit (page
32).
5
Attach another flash

unit specified as [CMD]
(commander unit) to
the camera.
Make sure that [CMD] is
displayed on the LCD panel
of the commander unit.
6
Place the camera and
this flash unit.