Illuminating For Video Shooting (Led Light) - Sony HVL-F45RM Mode D'emploi

Illuminating for video shooting
(LED light)
You can use the LED light of this
flash unit as a light source for
video shooting. It helps create
natural lights and shadows in an
environment with poor lighting,
such as indoors, to add more 3D
effects to video.
To use the LED light
1
Press the MENU button
() and select [LIGHT
MODE].
42
GB
2
Press the center
button to turn on the
LED light.
To turn it off, press the
center button once again.
3
Adjust LED brightness
with the control wheel.
• While the LED light of the
flash unit is lit, the flash
mode indicator ( ) is not
displayed on the camera
(i.e. the camera flash is
disabled).
• Depending on the camera,
lens, and brightness
settings for video
shooting, the proper
white balance may not be

obtained. In such a case,
adjust the balance on the
camera.
• To turn off the LED light,
press the MENU button.
Notes
Note that the LED beam may
be obstructed by the lens end,
depending on the size of the lens
attached to the camera.