Attaching/Removing The Flash Unit To/From The Camera - Sony HVL-F60RM Mode D'emploi
Unité flash qui peut être utilisée avec les appareils photo à objectif interchangeable sony, les caméscopes numériquees hd à objectif interchangeable et les appareils photo numériques sony pourvu d'une griffe multi-interface classique
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Attaching/removing the flash unit to/from the camera
To attach the flash unit to
the camera
1
Turn off the power of the
flash unit.
• If your camera is equipped
with a built-in flash, make
sure that the camera flash is
not released.
2
Press and hold the release
button and rotate the lock
lever away from "LOCK."
3
Remove the terminal
protection cap from the flash
unit; and the shoe cap from
the camera.
4
Insert the Multi Interface
foot of the flash unit into the
Multi Interface shoe on the
camera and push in the foot
all the way.
5
Rotate the lock lever toward
"LOCK" to secure the flash
unit on the camera.
To remove the flash unit
from the camera
Turn off the power of the flash unit
first. Press and hold the release
button, rotate the lock lever away
from "LOCK," and then slide the
unit out of the Multi Interface shoe.
Note
• When you do not intend to use the
flash unit, be sure to attach the
terminal protection cap back to the
Multi Interface foot.
GB
GB
15
Publicité
Chapitres
Table des Matières
