Sony HVL-F45RM Mode D'emploi page 35

7
Make sure that the
flash unit on the
camera (commander
unit) and this flash
unit are wirelessly
connected and ready
to fire.
Wirelessly connected: The
LINK lamp is lit in green.
Ready to fire: The TEST
button on the back of the
unit is lit in orange.
In addition, while [ON] is
selected for [WL READY
LAMP] on the MENU settings
screen, the AF illuminator on
the front of the receiver unit
blinks.
8
Press the shutter
button to take a photo.
To fire a test-flash, press
the TEST button on the
commander unit.
Tips
• On the receiver units, the flash
mode of the commander unit is
applied.
• During manual flash photography,
you can press the Fn button and
specify [CMD LINK] for the power
level setting to allow adjustment on
the commander unit.
Multiple wireless flash
photography with
lighting ratio control
You can perform wireless flash
photography while controlling
the lighting ratio among a
maximum of 3 groups including
the commander unit and 2
groups of off-camera flashes.
Commander unit: HVL-F45RM
(this flash unit) or a radio
wireless commander
Receiver unit (off-camera flash):
HVL-F45RM (this flash unit) or a
wireless receiver


 Commander unit (CMD)
 Wireless receiver
 Receiver unit (RCV)
• Press the Fn button on the
commander unit and select
[ON] for [RATIO CONTROL: OFF].
• The commander unit fires as
the flash unit in the A group.
• If you do not want the
commander unit to fire, press
the Fn button and specify
[OFF] for the
setting.

CMD flash
35
GB
GB