Selecting The Flash Coverage (Zoom); Automatic Selection Of The Flash Coverage (Auto Zoom) - Sony HVL-F45RM Mode D'emploi

Selecting the flash coverage (zoom)

Automatic selection of the flash coverage (auto
zoom)
This flash unit automatically selects the appropriate flash coverage
for the focal length of the lens on the attached camera within the
range from 24 mm to 105 mm (auto zoom). You do not need to
manually select the flash coverage most of the time.
When [AUTO] is displayed as the flash coverage (zoom) setting on the
LCD panel, the auto zoom function is enabled.
• If you use a lens with the focal length of less than 24 mm while the
auto zoom function is enabled, [WIDE] will blink on the LCD panel.
In such a case, it is recommended that you use the built-in wide
panel of this flash unit. To use the wide panel, gently pull out the
wide panel along with the bounce sheet, fold down the wide panel
to cover the flashtube, and then push the bounce sheet back into
the flash unit.
• [WIDE] is displayed on the LCD panel.
• When you retract the wide panel, push it back all the way into the
flash unit and make sure that [WIDE] is not displayed on the LCD
panel.
• When you pull out the built-in wide panel, do not apply excessive
force as it may cause damage to the wide panel.
44
GB