Pairing With A Radio Wireless Commander/Receiver (For Radio Wireless Flash Photography) - Sony HVL-F45RM Mode D'emploi

Pairing with a radio wireless
commander/receiver (for radio
wireless flash photography)
To perform radio wireless flash
photography with this flash
unit, you need another flash
unit that supports radio wireless
communications or a radio
wireless commander/receiver
(not supplied) in addition to this
flash unit and must pair them
both together.
This section describes how to
pair two HVL-F45RM (this flash
unit) units.
For pairing the flash unit with
a radio wireless commander/
receiver (not supplied), refer
to the operating instructions
supplied with the device.
Tips
• You need to bring both devices
within 1 m from each other for
pairing.
• You can pair the flash unit with up
to 15 radio wireless devices.
1
Turn on the power of
this flash unit and the
other device.
2
Press the WL button
( ) to display the

screen for setting
the wireless mode,
and then specify
one flash unit as the
commander unit
and the other as the
receiver unit.
• To specify a flash unit
as the commander unit,
select [CMD].
GB

17
GB