Sony HVL-F45RM Mode D'emploi page 39

Wireless flash
photography (with the
remote unit)
You can specify another flash
unit attached to the camera or
the built-in flash of the camera
as the controller unit, and then
use the controller unit to trigger
the flash operation of this flash
unit placed away from the
camera.



 Built-in flash
 Controller unit (CTRL)
 HVL-F45RM
As the controller unit, you can
use the built-in flash of an
A-mount camera or another
flash unit model (HVL-F20M,
HVL-F32M, HVL-F43M, HVL-F60M,
etc.) available for a separate
purchase.
1
Attach this flash unit
to the camera and turn
on the power of both
devices.
2
Select wireless (WL) flash
mode on the camera.
For selecting the flash mode
on the camera, refer to
the operating instructions
supplied with the camera.
3
Remove the flash unit
from the camera (page
14) and attach the
mini-stand to the unit
(page 32).
4
Release the built-in

flash of the camera or
attach another flash
unit to the camera.
• Make sure that [RMT]
is displayed on the LCD
panel of this flash unit.
If [CTRL] is displayed,
press the WL button and
change the setting option
to [RMT].
• Make sure that the flash
unit attached to the
camera is specified as the
controller unit. For details,
refer to the operating
instructions supplied with
the attached flash unit.
5
Place the camera and
this flash unit.
GB
39
GB