Sony HVL-F45RM Mode D'emploi page 19

4
Select [OK] to
establish pairing.
• On the commander unit,
the following screen is
displayed.
Pairing is established. On
the commander unit, you
can continue pairing with
other receiver units. Every
time pairing is established
with a receiver unit, the
number of paired devices
() increases.
• On the receiver unit,
the following screen is
displayed.
Pairing is established.
When pairing is established,
the LINK lamp turns from
red to green in color.
To establish a pairing with 2
or more devices
Set each device to be paired
with this flash unit as the
receiver unit and repeat steps
3 and 4.
When you are finished with

pairing with all receiver units,
select [EXIT] on the commander
unit, and then [OK] on the
following screen.
GB
19
GB