Setting And Starting A Washing Programme - Pelgrim GVW580ONY Notice D'utilisation

Setting and starting a washing programme

Select and start a washing programme
without delay
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Select a washing programme. Press
the programme button again and again
until the programme light related to the
washing programme comes on. Refer
to the 'Washing programmes' table.
4. Close the appliance door. The washing
programme starts automatically.
Select and start a washing programme
with delay start
1. Switch on the appliance and select a
washing programme
2. Press the delay start button.
– The delay start indicator light comes
on.
3. Close the appliance door.
– The countdown starts automatically.
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
3. Put the basket in the upper position.
4. Put back the front runner stops (A) in
their initial position.
Caution! If the basket is in the upper
position, do not put cups on the cup
racks.
How to cancel a washing programme
or a delay start
If a washing programme or a delay
start has not started, you can change
the selection.
When a washing programme or a delay
start are in progress, it is not possible
to change the selection. It is necessary
to cancel the washing programme or a
delay start to make a new selection.
How to cancel a washing programme
1. Press and hold the programme button
until the programme light goes off.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
How to cancel a delay start
1. Press and hold the programme button
until the programme and the delay start
lights go off.
2. Press the programme button to select
a new washing programme.
At the end of the washing programme
• The appliance stops automatically.
• The audible signals operate.
1. Open the appliance door.
– The end-of-programme indicator light
is on.
– The programme light is on.
2. Switch off the appliance.
3. For better drying results, keep the door
ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
27