Setting And Starting A Washing Programme - Pelgrim GVW5820NY Mode D'emploi

30

Setting and starting a washing programme

Starting the washing programme
without delay start
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
• The related programme indicator
stays on.
• All the other programme indicators go
off.
3. Close the appliance door, the washing
programme starts automatically.
Starting the washing programme with
delay start
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
Do these steps to move the upper
basket to the higher position:
1. Pull the basket out until it stops.
2. Carefully lift the two sides until the
mechanism is engaged and the basket
is stable.
Do these steps to move the upper
basket to the lower position:
1. Pull the basket out until it stops.
2. Carefully lift up the two sides.
3. Hold the mechanism and let it fall back
down slowly.
Caution!
• Do not lift or lower the basket on one
side only.
3. Press again and again the delay start
button to set the number of hours.
• The related hour indicator comes on.
• The delay start indicator comes on.
4. Close the appliance door, the count-
down starts automatically.
When the countdown is completed, the
washing programme starts automatically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
Cancelling the delay start
1. Open the appliance door.