Control Panel - Pelgrim GVW580ONY Notice D'utilisation

Salt container
3
Detergent dispenser
4
Rinse aid dispenser
5
Rating plate
6

Control panel

On/off button
1
Programme indicator lights
2
Indicator lights
3
Programme button
4
Delay start button
5
End-of-programme
1)
Rinse aid
1)
Salt
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.
Programme selection/cancel button
Use the programme selection/cancel button
for these operations:
• To set the washing programme. Refer to
the chapter 'Setting and starting a wash-
ing programme'.
7
8
9
1
5 4
A B
Indicator lights
The indicator comes on when:
• The washing programme is completed.
• You adjust the level of the water softener.
• You activate/deactivate the audible signals.
• There is a malfunction of the appliance.
The indicator comes on when it is necessary to fill the rinse aid
dispenser.
It comes on when it is necessary to fill the salt container. Refer to
'Use of dishwasher salt'.
After you fill the container, the salt indicator light can stay on for
some hours. This does not have an unwanted effect on the oper-
ation of the appliance.
• To set the water softener. Refer to the
chapter 'Setting the water softener'.
• To deactivate/activate the audible sig-
nals. Refer to the section 'Audible sig-
nals'.
Filters
Lower spray arm
Upper spray arm
2
21
3