Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Husqvarna Fleet Services
Husqvarna Fleet Services
the operator an overview of all products that are
connected. On this product a Husqvarna Fleet
™
Services
sensor can be installed. The Husqvarna Fleet
™
Services
sensor collects product data and lets you
connect to the Husqvarna Fleet Services
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
•
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product, you
must read and understand the contents of this
operator's manual.
•
Save all warnings and instructions.
•
Comply with all applicable laws and regulations.
•
The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
•
Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
•
Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
•
Do not let a child operate the product.
•
Only let approved persons operate the product.
•
The operator is responsible for accidents that occur
to other persons or their property.
•
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
•
Always be careful and use your common sense.
1268 - 001 - 24.10.2019
™
™
is a cloud solution that gives
™
system. The
Husqvarna Fleet Services
operation time, servicing intervals and location of the
product.
For more information about Husqvarna Fleet Services
download the Husqvarna Fleet Services
to your Husqvarna representative.
Safety
•
This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
•
Keep the product clean. Make sure that you can
clearly read signs and decals.
•
Do not use the product if it is defective.
•
Do not do modifications to this product.
•
Do not operate the product if it is possible that other
persons have done modifications to the product.
Safety instructions for operation
WARNING: Read the warning instructions
that follow before you use the product.
•
Use personal protective equipment. Refer to
Personal protective equipment on page 10 .
•
Do not use the product in areas where fire or
explosions can occur.
•
Do not go away from the product when the engine is
on.
•
Always stop the engine before you go away from the
product.
•
Do not pull the hose of the dust extractor. The
product can fall and cause injury or damage.
•
The grinding head must touch the surface when you
start the product.
•
Do not start the product without the dust skirt
installed. The dust skirt must seal fully between the
product and the floor.
•
Keep away from areas where the product can cause
injury. The product can quickly change position and
hit you.
•
If the product does not operate correctly, stop the
engine.
•
Make sure that clothing, long hair and jewelry do not
get caught in moving parts.
•
Make sure that you are in a safe and stable position
during operation.
•
Do not operate the product unless you can get aid if
an accident occurs.
™
system reports data such as
™
app or speak
™
,
9
Publicité
Chapitres
Table des Matières
Dépannage
