Product Liability; Safety; Safety Definitions; General Safety Instructions - Husqvarna Soff-Cut 150 Manuel D'utilisation

Masquer les pouces Voir aussi pour Soff-Cut 150:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Type plate
1
SOFF-CUT 150
TYPE
SERIAL NO.
BLADE RPM
6
kW
PRODUCT NO.
7
1. Manufacturer
2. Manufacturer address
3. Model
4. Serial number: production year, production week and
sequence number
5. Blade rpm

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

General safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product, you
6
2
XXXX
YYYY WWXXXX
kg
9
6. Engine power
7. Maximum blade dimension
8. Product weight
9. Product number
10. Country of production

Product liability

10
As referred to in the product liability laws, we are not
3
liable for damages that our product causes if:
4
the product is incorrectly repaired.
the product is repaired with parts that are not from
5
the manufacturer or not approved by the
manufacturer.
8
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
CALIFORNIA AIR RESOURCES
BOARD (CARB)
Note: This machine is considered a preempt Off-Road
Application as relating to CARB standards. The U.S
EPA has sole authority to establish emission standards
for preempt construction equipment.

Safety

must read and understand the contents of this
operator's manual.
Save all warnings and instructions.
Comply with all applicable laws and regulations.
The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
Do not let a child operate the product.
Only let approved persons operate the product.
The operator is responsible for accidents that occur
to other persons or their property.
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
Always be careful and use your common sense.
This product produces an electromagnetic field
during operation. This field can under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
714 - 004 - 06.07.2021

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Soff-cut 150 d

Table des Matières