Husqvarna Duratiq 6 Propane Manuel D'utilisation page 14

5. Hold the handlebar and with one foot on the weight
tilt the product rearward. Tilt the product until the
handlebar is on the floor.
6. Put on protective gloves.
7. Use the tool plate tool (A) to unlock the tool plate
from the grinding disc.
8. Pull the tool plate straight out (B) to remove the tool
plate from the grinding disc.
9. Use a hammer to remove the diamond tools from the
tool plate.
14
10. Attach new diamond tools to the tool plate with a soft
hit of the hammer.
11. Attach the tool plate straight (C) on the grinding disc.
A
12. Use the tool plate tool (D) to lock the tool plate to the
grinding disc.
B
13. Carefully lift the product to operation position. Use
the handlebar and the weight as support.
To connect a dust extractor
WARNING: Do not use the dust extractor if
the dust extractor hose is damaged. The risk
increases that you breathe in dust that is
dangerous to your health. Use approved
respiratory protection.
1. Examine the dust extractor hose for damages.
2. Make sure that the filters in the dust extractor are
clean and not damaged.
3. Make sure that the grinding head is not in operation.
4. Connect the dust extractor hose to the product.
C
D
1268 - 001 - 24.10.2019