Husqvarna Duratiq 6 Propane Manuel D'utilisation page 16

1. For rough adjustment of the handle:
B
a) Pull the lock lever (A) on the handle and hold it in
this position.
b) Adjust the handle (B) to an applicable operation
height.
c) Release the lock lever on the handle to lock the
handle position.
2. For fine adjustment of the handle:
D
C
a) Pull out the lock lever (C) on the handle and hold
it in this position.
b) Adjust the handle (D) to an applicable operation
height.
c) Release the lock lever on the handle to lock the
handle position.
16
3. Loosen the lock knob (E) on the handlebar.
A
4. Adjust the handlebar (F) to the correct position.
5. Tighten the lock knob to set the handlebar position
To open the storage hatches
The product has 2 storage hatches.
1. Lift and turn the locking knob (A) to open the storage
2. Fold up the storage hatch (B).
F
E G
(G). When the handlebar position is set, pull the
handle lock knobs out and put them into idle
position.
hatch near the control panel.
A
B
1268 - 001 - 24.10.2019