Control Panel - Husqvarna Duratiq 6 Propane Manuel D'utilisation

1. Connect the water hose to the water release
coupling on the product.
2. Use correct pressure and water flow. Refer to
Technical data on page 35 .
USB charger on the control panel
The USB charger on the control panel can be used to
charge mobile devices.
• To charge through the USB charger is only possible
when the ON/OFF button on the control panel is on.
• The mobile device continues to charge if the product
stops or the emergency stop button is engaged.
• The product does not set a time limit for how long a
mobile device can be charged. Charge your mobile
device as recommended by the manufacturer of the
mobile device.
• The USB charger supplies a maximum output of
10W.
18
To charge a mobile device
• Connect your mobile device to the USB charger.
Operation speed
If the product is operated on a new surface type, set the
speed to 70% initially. When the operator knows the
surface type, the speed can be adjusted.

Control panel

Operate the product manually with the control panel in
the handlebar. Refer to
6 , for an overview of the control panel buttons.
To start the product with control panel
1. Connect the propane tank. Refer to
disconnect the propane tank on page 17 .
2. Turn the battery switch clockwise.
Control panel overview on page
To connect and
1268 - 001 - 24.10.2019