Identification Label; Main Components - Stiga T 102 Série Manuel D'utilisation

Meaning of symbols:
Warning! Read the
instructions before use.
Warning! Remove the key
and read the instructions
before carrying out any
maintenance or repair work.
Danger! Ejected objects:
Do not operate without either
the rear discharge guard or
the grass catcher being in
place. (for models with rear
collection system only).
Danger! Ejected objects:
Ensure persons remain
at a safe distance.
Danger! Machine rollover:
Do not use the machine on
gradients in excess of 10°.
Danger! Dismemberment:
Make sure that children
remain at a safe distance
from the machine when
the engine is running .
Cutting risk. Cutting
device in operation. Do not
insert hands or feet into the
cutting device housing.
Warning! Keep away
from hot surfaces.
Do not climb on the
machine by treading on the
cutting device assembly
protection panels.
When using the towing
max xxx N (xx kg)
kit, do not exceed the load
limits indicated on the label,
and respect the applicable
safety regulations.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.

3.3 IDENTIFICATION LABEL

The identification label includes
the following data (fig. 1):
1. Sound power level
2. CE Conformity marking
3. Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
8. Nominal power and maximum
operating engine speed
9. Weight in kg
10. Type of transmission
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last page of the manual.

3.4 MAIN COMPONENTS

The machine consists of a series of
main components, which perform
the following functions (fig. 1):
A. Engine: this moves the cutting
device and drives the wheels. Its
specifications and regulations for use
are described in a specific manual.
B. Cutting device assembly: this is
the assembly comprising the casing
that houses the rotating cutting
device, and the cutting device.
C. Cutting device: these are what cut the
grass; the fins at the ends help convey the
cut grass towards the discharge chute.
D. Rear discharge guard (available upon
request): this can be fitted in place of
the grass catcher and prevents objects
from being drawn up by the cutting device
and hurled away from the machine.
(for rear collection models only).
E. Side discharge chute: in addition to
depositing the grass on the ground
laterally, the side chute also constitutes
a safety element, since it prevents
any objects picked up by the cutting
device from being projected long
EN - 6