Spypoint S-WiFi Manuel D'utilisation page 9

16
Select
Stamp:
(Yes/No)
temperature and moon phases on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Changes the temperature display.
Temp.
format:
(°F/°C)
Sets the display language of the camera's menus.
Language:
(English/Français/
Deutsch)
Sets the daily number of synchronizations
Synchronize:
(Permanent/1/2/6/
12 times a day)
For «Home Security» mode, this option
changes the frequency at which the camera
communicates with the existing Wi-Fi network
to send photos in the folder selected during the
configuration of the system (with «SPYPOINT
Security manager» software).
For «mySPYPOINT»
changes the frequency at which the camera
communicates with the
in order to update its status or to send photos on
the user's account.
Note: When this option is set to «Permanent», it
requires more energy.
or cancel imprinting date,
mode, this
mySPYPOINT
time,
Synchronize
at:
Sensitivity:
(Low/Medium/
High)
option
server
For «Home Security» mode, defines at what
time of day the camera communicates with the
existing Wi-Fi network to send photos in the
folder selected during the configuration of the
system (with «SPYPOINT Security manager»
software).
Note: The computer must be running and the
software enabled for synchronization work.
For «mySPYPOINT» mode, defines at what
time of day the camera communicates with the
mySPYPOINT server in order to update its
status or to send photos on the user's account.
(Over a period of 24 hours)
e.g.1: The option «Synchronize at» is set to 8:00
and the option «Synchronize» is set to 6/day.
The camera performs 6 synchronizations per day
and begins its first transfer at 4h, then at 8h, 12h,
16h, 20h and 24h.
e.g.2: The option «Synchronize at» is set to
13:00 and the option «Synchronize» is set to 2/
day.
The camera performs 2 synchronizations per day
and begins its first transfer at 1h, then at 13h.
Sets the detection sensitivity of the camera.
Note: The system detects only heat sources in
motion. So it is important during installation to
avoid as much as possible, objects obstructing
the camera . This prevents the camera from
being triggered because of the sun reflecting on
these objects. (e.g. a tree branch)
17