Spypoint S-WiFi Manuel D'utilisation page 10

18
Allows the user to select the type of power
Power:
(Batteries/
supply.
Electricity)
Choose «Electricity» if the camera is powered
of a main electric supply. (using a 12-volt DC
adapter AD-12V, sold separately). Main electric
supply is recommended for security purposes.
It provides an instant trigger time when a
movement is detected. The lithium battery pack
and the AA batteries can remain safely inside the
camera and it is ideal in case of a blackout. A
12-volt DC adapter that can provide a minimum
of 800 mA is required
(See «Options» for accessories).
When the option «Electricity» is enabled:
• The option «Delay» is reduced and locked to 2
seconds to speed up the photo shooting.
• The «Multi-shot» speed is improved with a 2
second delay between each take.
• The option «Time Lapse» is disabled.
• The option «Synchronize» is locked on
«Permanent» (for «Home Security» and
«mySPYPOINT» mode) to allow transmission
of pictures after each set of pictures recorded.
• The option «Synchronize at» is ignored.
• If the option «Multi-shot» is enabled, the
Wi-Fi transmission is performed once the
series of photos is recorded.
• The camera is synchronized with the server
every 10 mins. and uses an average of 1.4Mb
of data per day excluding the weight of
pictures transmitted during this period.
Allows the camera to operate in continuous
Continuous:
(Yes/No)
mode. When there is no more space available on
the memory card to save photos or videos, the
camera continues to save by erasing the oldest
files and by replacing them with newest ones.
Selects the desired infrared illumination mode.
Infrared:
(On/One LED/
Off)
All LEDs illuminate when taking photos or
ON:
videos at night.
Only a single LED illuminates (see
One LED:
figure). This option can be useful when using an
IR-Booster.
LEDs are deactivated so your night
OFF:
photos or videos are pitch black.
Allows use of the remote control. (see «Remote
Remote :
control» section for details)
(REMOS)
(On/Off)
Allows the camera to trigger, up to a distance
IR-Booster
of 50 ft, one or more remote IR-BOOSTER
(Remos)
(On/Off) infrared lighting devices without the use of an
additional transmitter.
Allows the camera to be triggered wirelessly by
MS-1:
one or more MS-1 devices. (see «Options» for
(Remos)
details)
(On/Off)
Displays system information:
Info:
• Model name
• Serial number
• Software version
• MAC address
19
One LED