Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20
CONFIGURATION MODES
The SPYPOINT WiFi camera offers the possibility to choose
between 3 configuration modes: «Hunting», «Home Security» or
«mySPYPOINT».
«HUNTING
» MODE
The network of the WiFi camera can be enabled
Features:
or disabled using the remote control RC-1
and allows the hunter to access his camera
while staying away from his hunting spot.
Connection to the WiFi camera is possible
with a Smartphone, laptop or a tablet to view
pictures or to change settings.
When configuring:
(Follow the steps on the camera screen)
Name of the
When entering the name of the camera, it is
possible to select up to 20 characters. Use but-
camera
tons
«
bers and use buttons «
from right to left in the name. Press «OK» only
when the name is completed.
Test the
• Select the existing Wi-Fi network with the
camera name
connection
tablet.
• Open a browser and type
com»
• The connection test is completed, press
«OK» on the camera.
Note: After 2 minutes of inactivity on the Wi-Fi
network, the camera automatically returns to its
previous mode («PHOTO» or «VIDEO») and
the Wi-Fi network is disabled.
▲
▼
» and «
» to change letters or num-
◄
►
» and «
» to move
on a Smartphone, laptop or a
«www.cameraname.
and you should see the status page
It is possible to view photos, see the status of
Camera setup/
the camera and change its configuration via the
Viewing photos:
Wi-Fi network (The camera must be in
«PHOTO» or «VIDEO» mode ).
• Activate the camera Wi-Fi network with the
remote control. (see «Remote control» section)
• Select the existing Wi-Fi network with the
camera name
tablet.
• Open a browser and type
com».
Note: After 2 minutes of inactivity on the Wi-Fi
network, the camera automatically returns to its
previous mode («PHOTO» or «VIDEO») and
the Wi-Fi network is disabled.
Allows to transfer the new photos to a folder in
SPYPOINT
a single download from a Smartphone, laptop
Hunting photos
or a tablet. (The camera must be in «PHOTO»
downloader
or «VIDEO» mode)
software:
• Activate the camera Wi-Fi network with the
(Available on www.
remote control. (see «Remote control» section)
spypoint.com)
• Select the existing Wi-Fi network with the
camera name
tablet.
• Open the software and select the folder
where you want to save the images and they
will be automatically
Note :
The names of the images downloaded by
the software starts by
Note: After 2 minutes of inactivity on the Wi-Fi
network, the camera automatically returns to its
previous mode («PHOTO» or «VIDEO») and
the Wi-Fi network is disabled.
on a Smartphone, laptop or a
«www.cameraname.
on a Smartphone, laptop or a
transferred.
SPLG.
21
Publicité
Table des Matières
