Solar Panel - Spypoint S-WiFi Manuel D'utilisation

8
EXTERNAL
The camera can be powered from an external 12-volt DC input
such as a 12-volt battery (BATT-12/KIT-12V, sold separately) or a
12-volt adapter (AD-12V, sold separately). When using a 12-volt
connection, we recommend removing the AA batteries to prevent
surcharges. During the installation of a 12-volt connection, place the
switch inside the battery case to «ALK» (i.e. alkaline). If combined
with a lithium battery pack, slide the switch to «LIT-09». To find the
accessories available for the 12-volt power supply, see «Options».

SOLAR PANEL

This model offers the possibility of a connection to a solar panel
SP-12V (sold separately, see «Options») to maintain the charge
of the lithium battery pack LIT-09/LIT-C-8 (sold separately, see
«Options»). During the installation of the rechargeable lithium
battery pack, slide the switch inside the wbattery case to «LIT-09»
to activate the charging system of the solar panel.
MEMORY STORAGE
Using a memory card (sold separately, see «Options») is required
to operate the camera. When the «Photo» or «Video» mode is
selected, the screen displays «No memory card» if no memory card
is present. The camera is compatible with SD/SDHC memory card,
up to 32 GB capacity. Before inserting or removing a memory card,
the camera must be turned off. Failing to do so may cause loss of
pictures or damage the pictures already recorded on the memory
card. When the SD card is full, the viewing screen indicates
«Memory card full» when the «Photo» or «Video» mode is selected.
The used space on the memory card is displayed as percentage in
the upper right corner of the screen when the camera is in «Test»
mode. The following data shows the approximate quantity of photos
or video length that can be taken by the camera depending on the
memory card capacity.
2.0 GB
Photo
8 MP 1190
Video
640 x 480 65 min
«BUSY» LED
The «BUSY» light, located next to the screen, lights up when
the camera is recording and flashes during the activation of a Wi-Fi
network.
MAIN MENU
▲ ▼
Use the « » and « » button to navigate the interface or to
modify a selection, the « OK » button to select and the « BACK »
button to return to the previous menu.
The following information appears on the main menu screen:
1.Serial number
2.Software version
1.
4.0 GB 8.0 GB 32 GB
2380 4760 19040
2h10 4h10 16h40
2.
9