Settings Menu - Spypoint S-WiFi Manuel D'utilisation

12
VIEW
Allows the user to view photos or videos on the built-in
3.5" screen of the camera or on a TV set.
With 3.5" built-in screen:
When «View» mode is selected, the last recorded image or video
automatically appears on the screen. Press the «
button to view the previous or next file. Press «OK» to see the
different options available. Press «BACK» to return to the photo or
video. See different options available:
Plays or pauses the video on the screen.
Play:
(This option is available only for videos)
Deletes the photo or video displayed on the screen.
Delete:
Deletes all photos and videos that were not
Delete all:
protected.
Deletes the entire contents of the memory card,
Format:
including protected files.
Note: Press the « ▲ » to enlarge the image on the
screen or « ▼ » to return to the original size. When
the image is enlarged, use the navigation buttons to
video the part of the image wanted. Press «BACK»
to return to original size.
With a TV set:
Allows the user to view photos and videos directly on a TV set. Turn
the camera on and plug the yellow end of the composite audio-video
cable supplied with the camera to «VIDEO IN» input of the TV set
and the other end into the «TV OUT» output of the camera. The
camera screen turns black and the last recorded picture or video will
appear on the TV screen. To change the photos or videos, use the
◄ ►
« » and « » button. The options are the same as when viewing
on the built-in screen of the camera (see above).
◄ ►
» or « »

SETTINGS MENU

Allows the user to set the advanced settings of the camera.
To configure the system in another language, press the «
button until the option «Language» is highlighted. Press «OK»
and modify the selection with «
choice by pressing «OK». The system will change all the menus in
the selected language.
Navigating the menu:
• « ▲ » and « ▼ » button to change settings
◄ ►
• « » and « » button to change pages
When selected, some options affect the behaviour of other
options from the list of the settings menu. In this case, the
selected option is displayed in yellow and options affected are
shown in gray.
Allows to choose the configuration mode.
WiFi conf.:
(Hunting/
Home Security/
Note: When «Hunting» mode is selected, the
mySPYPOINT)
options «Synchronize»
at» are disabled. The option «Remote » displays
«N/A», but will always be activated.
(See «Configuration modes» section for more
details on the different modes.)
Allows to test the current configuration.
Test WiFi:
Set the date as Year/Month/Day
Date:
Set the time as Hour/Minute/Second
Time:
Note: The seconds are not printed on the pictures
when «Stamp» option is activated.
Allows the user to choose between a 12 or
Time format:
(12h/24h)
24 hour time period display on the photos.
(eg. 6:00 pm or 18:00)
▼
▲ » or « ▼ » button. Confirm the
and «Synchronize
13
»