Specifications; Plug Configurations - Hatco GLO-RAY GR2SD Série Manuel D'installation Et D'utilisation

English

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the application.
WARNING
ELECTRIC SHOCK HAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: The specification label is located on the bottom of the
unit. See label for serial number and verification of unit
electrical information.
NOTE: Receptacle not supplied by Hatco.
Form No. GR2SDm-0316
NEMA 5-15P
NEMA L14-20P
NEMA 14-20P
BS-1363
Plug Configurations
5

SPECIFICATIONS

NEMA 5-30P
NEMA 5-20P
NEMA L14-30P
NEMA 14-30P
CEE 7/7 Schuko