Hatco GLO-RAY GR2SD Série Manuel D'installation Et D'utilisation page 20

OPTIONS AND ACCESSORIES
Flip-up Doors
Flip-up doors are available for either the customer side or the
control side of the unit. Flip-up doors help keep heat in and air
currents away from the heat zone. They can be installed on one
side of the unit only and not on the same side with sneeze
guards. Use the following procedure to install flip-up doors (the
procedure is the same for either side as well as each shelf).
NOTE: Units 48" (1216 mm) and larger require 2 doors per shelf
and a center mounting bracket.
1. Remove the two screws from the element end cover above
the desired shelf on each side of the unit.
2. Install the left mounting bracket and right mounting bracket
onto the appropriate side of the unit. To install each bracket:
a. align the holes on the mounting bracket with the screw
holes on the element end cover of the unit.
b. Insert the previously removed screws through the
mounting bracket and into the unit. Tighten securely.
Left Mounting
Bracket
Flip-Up Door mounting Brackets
NOTE: For units 48" (1216 mm) and larger, a
center mounting bracket is required.
Remove the screws from the center of
the middle or top housing and use
them to mount the center mounting
bracket.
3. Remove one of the hinge screws from the end of the hinge
on the flip-up door assembly
4. Install the flip-up door onto the mounting brackets.
a. Pass the assembled hinge screw on the door through
the hole in either the left or right mounting bracket (use
the center bracket if the unit is 48" (1216 mm) or larger).
b. align the screw hole at the opposite end of the door
hinge with the hole in the mounting bracket.
c. Insert the hinge screw through the mounting bracket and
into the door hinge. Tighten the hinge screw until the
door is secure. Do not over-tighten.
NOTE: Apply thread locking compound to the removed hinge
screw before installation.
Right Mounting
Bracket
Center Mounting
Bracket
Left
Mounting
Bracket
End
Cover
Screw
End Cover
Screw
Hinge
Screw
Flip-Up Door Installation
20
English
End
Cover
Hinge
Left Mounting
Bracket
Flip-Up
Door
Form No. GR2SDm-0316