Specifications; Plug Configurations; Electrical Rating Chart; Dimensions - Hatco DHWBI Série Manuel D'installation Et D'utilisation

English

Plug Configurations

Some units are supplied from the factory with an electrical
cord and plug installed. Plugs are supplied according to the
application (not available with split controls). Refer to the
OPTIONS AND ACCESSORIES section for more information.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: Specification label located on side of the unit. See
label for serial number and verification of unit electrical
information.

Electrical Rating Chart

Model Voltage
DHWBI-S2 120
120/208–240
DHWBI-S3 120
120/208–240
DHWBI-S4 120/208–240
NOTE: Shipping Weights are estimated.

Dimensions

Width
Model (A)
45-1/2"
DHWBI-S2
(1156 mm)
67-1/2"
DHWBI-S3
(1715 mm)
89-1/2"
DHWBI-S4
(2273 mm)
* Units with over-sized bezel option have a Depth (B) of 27" (686 mm).
Form No. DHWBISM-0519
Hertz Watts
60 1920
60 2880
60 3840
Depth Height
(B) * (C)
15-5/8" 12-11/16"
(397 mm) (321 mm)
15-5/8" 12-11/16"
(397 mm) (321 mm)
15-5/8" 12-11/16"
(397 mm) (321 mm)
A
Front View
NEMA 5-15P
NEMA 5-30P
Plug Configurations
NOTE: Receptacle not supplied by Hatco.
Plug Configuration
Amps (optional)
16.0 NEMA 5-20P
8.0 NEMA L14-20P
24.0 NEMA 5-30P
16.0 NEMA L14-20P
16.0 NEMA L14-20P
5/16"
(8 mm)
Flange
5

SPECIFICATIONS

NEMA 5-20P
NEMA L14-20P
Shipping Weight
93 lbs. (42 kg)
133 lbs. (60 kg)
172 lbs. (78 kg)
B
C
Side View