Turning The Display; Displaying Time - Seca 684 Mode D'emploi Et Garantie

Masquer les pouces Voir aussi pour 684:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38

Turning the display

The display for the scales is mounted facing
the chair. The display can be turned 180°
so that either the patient or health care per-
sonnel can view or operate the display.
Turn the display anticlockwise until it is in
the desired position.
Folding the seat up or down
To lower the folding seat:
1.
Hold the folding seat firmly with one
hand.
2.
Unfasten the bolt (1) on the left, above
the folding seat by turning it clock-
wise.
3.
Lower the seat.
Caution!
Push the bolt beneath the seat so it
does not extend out.
Only load the seat with a weight up to
the permissible highest level (150 kg).
To raise the folding seat:
1.
Lift the folding seat up.
2.
Fasten the folding seat by turning the
bolt counterclockwise.
Make sure that the seat is correctly
locked into place.
Make sure that the seat is not acciden-
tally unlocked.

Displaying time

After the scale has been switched on, time is displayed for about 2 seconds.
If a printer is connected, the time and date of the weighing operation is printed out in ad-
dition to the weight itself.
Depending on the country to which it is supplied, the display can be in either 24-hour
clock format (e.g. 19:45) or in 12-hour format (e.g. P 7:45).
If TIME appears in the display and 3 alarm signals are heard after the scale is switched
on, this means that the scale has been without a power supply for a prolonged period, so
the clock needs to be reset.
28
1

Publicité

Table des Matières
loading

Table des Matières