Preparation For Use; Before You Begin - Bresser BF-PRO Mode D'emploi

PREPARATION FOR USE

Attention! For fi rst time operation and battery replacement:
First insert batteries for main unit and then insert batteries
for remote sensor.
A) BEFORE YOU BEGIN
Position the remote unit and main unit within effective
transmission range, which, in usual circumstances, is 20 to 30
meters. Note that the effective range is vastly affected by the building
materials and where the main and remote units are positioned.
Try various set-ups for best result. Though the remote units are weather
proof, they should be placed away from direct sunlight, rain or snow.
B) BATTERY INSTALLATION: MAIN UNIT
1. Open the battery compartment door.
2. Install 4 batteries (UM-3 or "AA" size 1.5V) strictly
according to the polarities shown.
3. Replace the battery compartment door.
C) To install the AC-DC
adapter for Continue
Projection:
Use 4 X AA, 1.5V batteries
and AC-DC adapter
(AC230V, 50Hz-DC7.5V,
200mA) included.
30