Bresser BF-PRO Mode D'emploi page 37

HOW TO STOP AN ALARM
Press [ALARM] on the unit to stop an alarm.
ALARM FEATURE
* Weekday Alarm
The alarm sound will be activated and the icon will be fl ashed
on weekday when it is armed and the alarm time is reach.
* Single Alarm
The alarm sound will be activated and the icon will be fl ashed
once when it is armed and the alarm time is reach. Once it
fi nished, it will be disabled automatically.
* Pre-Alarm
The pre-alarm sound will be activated and the icon will be
fl ashed if outdoor temperature under or equal zero degree, which
is programmable 15, 30, 45, 60 or 90 minutes earlier than the
weekday alarm or single alarm time.
Temperature Alarm
The weather station BF-Pro offers an Alarm function for outside tem-
peratures. A defi ned temperature range can be set. An acoustic alarm
signal is triggered as soon as the programmed limit is reached by one
of the outside sensors (channel 1, 2 or 3). You can set one minimal and
one maximal value for the temperature alarm. The alarm triggers when
the lowest or highest temperature at the outdoor sensor is reached.
The limit for lowest outdoor temperature is -50°C and for the highest
temperature +60°C.
Activation/Deactivation of the Temperature Alarm
1. Press the "ALARM" key repeatedly until you get the temperature dis-
play icon ( ) together with the text „OFF" or a specifi c temperature
▲
value. „OFF" means: Alarm is not active. Temperature value means:
This is the highest value set. An alarm will sound as soon as a higher
temperature is measured.
37
GB/IE