Bresser BF-PRO Mode D'emploi page 36

HOW TO SET ZONE TIME
1. Press [MODE] to select the Zonetime display
2. Press [MODE] for 2 seconds to enter zonetime setting mode.
Zonetime will fl ash
3. Press [▲] or [▼] to set the zonetime. Each change is 30
minutes from the normal time
4. Press [MODE] to confi rm.
HOW TO SET AND ARM THE ALARM
To set an alarm,
1. Press [ALARM] once to display alarm time. If the alarm is
disarmed, the time will be displayed as " OFF ".
2. Hold [ALARM] for two seconds. The hour digits will blink.
3. Enter the hour using [▲] or [▼].
4. Press [ALARM]. The minute digits will blink.
5. Enter the minutes using [▲] or [▼]. Press [ALARM] once
snooze time can be set by pressing [▲] or [▼].
6. Press [ALARM] to exit.
7. Repeat the same procedure to set single alarm.
The alarm "
W
indicating which alarm is armed. You can also arm or disarm an
alarm by pressing the [▲],[▼] button at alarm display mode.
Press MODE to return to clock display mode.
SNOOZE FEATURE
When the alarm sound is on, press the snooze key enter snooze
mode. After Preset snooze time, alarm sound will be wake up
automatically. The snooze cycle will be restarted if you press the
snooze key again.
If you leave the alarm sound on for 2 minutes, it will enter snooze
mode automatically with maximum 3 times.
" " " and " Pre-AL" icons will be displayed
S
36