MRA 4025066153862 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
2 Round head screws, M5 x 16 mm
1 Round head screw, M5 x 20 mm
3 Plastic washers, 12 x 5 mm
1 Neoprene sleeve, 10 mm
2 Neoprene washers, 16 x 4.5 x 4
mm
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen.
3. Insert the M5 x 16 mm round head screws with the plastic washers into the two
upper holes on the MRA screen.
4. Place the 4 mm neoprene washers onto the upper screws from the inside (P1).
5. Insert the M5 x 20 mm round head screw through the lower hole on the MRA
screen.
6. Place the 10 mm neoprene sleeve onto the lower screw form the inside (P1).
7. Position the MRA screen and tighten the screws.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
DUCATI Multistrada 950 17- / 1200 15-
Article No..
--- Allen key, 3 mm
Allen key, 5 mm
10554
10673
10635
10688
10634
3
Required tools