sylvac WORK NANO Mode D'emploi page 5

Description
1. MODE button
2. SET button
3. " Favourite " button
4. button
5. button
Ø8 or 3/8"
6. Clamping shaft
7. Contact point Ø2 / M2.5 or 4-48-UNF
8. Lifting cap
9. Slot for Proximity cable
10. Slot for battery or Power Cable
11. Low battery
12. + / - Indicator
13. Keypad lock (chap. 4)
14. 6-digit display
15. Hold measured value (chap. 10)
16. Send data (chap. 10)
17. Measurement units mm / INCH (chap. 3)
18. Preset mode (chap. 3)
19. Analogue scale (chap. 8)
20. Lower limit exceeded
21. Upper limit exceeded
22. Tolerance indicators
23. Analogue scale lower limit (chap. 8)
24. Analogue scale upper limit (chap. 8)
25. Unit and value of analogue scale (chap. 8)
26. Tolerance mode (chap. 4)
27. MIN/MAX/DELTA mode (chap. 4)
28. Multiplier (chap. 4)
29. Bluetooth connection (chap. 9, depending on model)
®
30. Symetrical tolerances (chap. 8.1)
5
E