Original Accessories/Auxiliary Equipment - Parkside PDT 40 D3 Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Keep children and bystanders away while
operating the staple gun. Distractions can
cause you to lose control.
Stay alert, watch what you are doing and use
common sense when operating the staple gun.
Do not use a staple gun while you are tired
or under the influence of drugs, alcohol or
medication.
A moment of inattention while operating the
staple gun may result in serious personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the staple gun in unexpected situations.
Disconnect the appliance from the compressed
air source before starting any repairs or mainte-
nance work and before transportation.
RISK OF INJURY!
Do not use the appliance when working on
scaffolding or ladders.
Never use hydrogen, oxygen, carbon dioxide
or other gas in cylinders as an energy source
for this tool, as this could lead to an explosion
and thereby cause serious injuries.
RISK OF INJURY!
Do not operate the appliance if the trigger
lock
is damaged. Failure to do this can lead
to serious injury.
When undoing the hose coupling, hold the hose
firmly in your hand to prevent injuries caused
by a thrashing hose.
Always use a ¼" threaded nipple and quick
release for the compressed air connection.
Never place your hands in the vicinity of the
opening
if the appliance is ready for use.
Failure to do this can lead to serious injury.
PDT 40 D3
Ensure there is no damage.
Check the appliance for any possible defects
before use. If the appliance exhibits any faults,
it should not be used under any circumstances.
Do not use any sharp or pointed objects.
Never insert any sharp and/or metallic objects
into the appliance.
The compressed air driven staple gun may only
be connected to lines, in which it is ensured that
the maximum permissible pressure cannot be
exceeded by more than 10%, e.g. by means of
a pressure control valve built into the compressed
air line (pressure reducing valve) with a down-
stream or built-in pressure relief valve.
When using a compressed air driven staple
gun, make sure that the maximum pressure is
not exceeded.
The compressed air driven staple gun may only
be operated at the required pressure for the re-
spective operation to avoid unnecessarily high
noise levels, increased wear and consequent
errors.
WARNING! RISK OF FIRE AND
EXPLOSION!
Never operate the compressed air driven
staple gun with oxygen or combustible gases
under pressure.
Original accessories/auxiliary
equipment
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using fastenings or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Have your compressed air tool serviced by
a qualified repair person using only original
replacement parts. This ensures that the safety
of the compressed air tool is maintained.
GB │ IE │ NI
 5

Publicité

Table des Matières
loading

Table des Matières