Emission Levels; Intended Use; Technical Data; Machine Features - Festool ETSC 125 Li Notice D'utilisation Originale

English
Always use original Festool sanding pads.
–
Foreign pads are not suitable for the speed
of the sander and may break.
– While using the long-life dust bag be
aware of electric charge. Always when
possible use an antistatic suction hose
with the power tool. A slight electric shock
may cause you to panic briefly and become
distracted, which may result in an accident.
– Only use the mains adapter with this de­
vice.
– Only use the mains adapter together with
an original Festool plug-it cable.
– Only for AS/NZS: The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
– Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3

Emission levels

The levels determined in accordance with
EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Vibration emission level (three-
axle)
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
14
L = 68 dB(A)
PA
L = 79 dB(A)
WA
K = 3 dB
(vector sum for
h
a = 3 m/s
h
K=2 m/s
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

The sanders are designed for sanding wood,
plastic, composites, paint/varnish, filler and
similar materials as directed. Metals and mate­
rials that contain asbestos must not be pro­
cessed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi­
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in­
tended use.
This power tool is suitable for use with
BP Festool battery packs of the same voltage
class.
4

Technical data

Cordless random orbit
sander
Voltage
No-load speed
Sanding stroke
Sanding pad
Weight (excl. battery pack,
incl. sanding pad)
2
5

Machine features

2
[1-1] On/Off switch
[1-2] Button for releasing the battery pack
[1-3]
Capacity display
[1-4] Battery pack
[1-5]
Extractor connector
[1-6] Speed control
[1-7] Sanding pad
[1-8] Edge protector
CAUTION
ETSC 125Li
18 - 20 V
6000 - 10000 rpm
2.0 mm
D 125 mm
1 kg