Dust Extraction - Festool ETSC 125 Li Notice D'utilisation Originale

English
Sanding work
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered
surface prior to paintwork
– Intermediate sanding of paintwork
on surfaces
– Sanding thinly applied undercoat
– Sanding wood with sanding cloth
– Edge breaking on wooden parts
– Smoothing primed wooden surfa­
ces
– Sanding solid wood and veneered
edges
– Sanding rebate of windows and
doors
– Intermediate sanding of paintwork
at edges
– Light sanding of natural wood win­
dows using sanding cloth
– Smoothing wooden surfaces using
sanding cloth before staining
– Rubbing or removing excess lime­
stone residue using sanding cloth
– Intermediate sanding of paintwork
on stained surfaces
– Cleaning natural wood window re­
bate using sanding cloth
– Sanding stained edges
– Sanding of thermoplastics
7.2 Replacing the sanding pad [4a]
An optimal work result can only be ach­
ieved using original accessories and con­
sumables. The use of non-original accessories
or consumables invalidates the right to claim
under warranty.
Warning! Do not perform any structural
changes in the open interior space of the
machine when the sanding pad is dismantled.
Undo the four screws.
Remove the sanding pad by pulling it down­
wards.
Attach the new sanding pad.
Use four screws to tighten it by hand
(2.5 Nm).
16
Hardness of the sanding pad
Adjusting
Adapted to the surface being processed, the
wheel setting
machine can be equipped with sanding pads of
5 - 6
different hardnesses.
Soft: Universal for coarse and fine sanding, for
flat and convex surfaces.
Extra-soft: Fine sanding of moulded parts,
arches, radii. Do not use on edges.
7.3
4 - 5
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and sim­
ply to the StickFix sanding pad.
► Affix the self-adhesive sanding accessory to
3 - 4
pad accessories, in particular those which are
not yet touching the workpiece, may come
loose from the sanding pad and cause injuries.
Replace the sanding pad!
7.4
Dust hazard
2 - 3
► Dust can be hazardous to health. Always
► Always read applicable national regula­
1 - 2
Integral dust extractor with long-life dust bag
As standard, the sanders are equipped with an
integral dust extractor. The sanding dust is ex­
tracted through extraction openings in the
sanding pad and is collected in the dust bag.
Installing the dust bag [5]
clicks into place.
the dust bag.
ments.
the rear.
Attaching sanding accessories using
StickFix [4b]
the sanding pad.
In the case of a weakening adhesive ef­
fect of the StickFix surface, the sanding

Dust extraction

WARNING
work with a dust extractor.
tions before extracting hazardous dust.
Slide the dust bag onto the machine until it
If the suction power is decreasing, empty
Press the dust bag onto the actuating ele­
Remove the dust bag by moving it towards
Open the flap on the dust bag.
Empty the dust bag and dispose of the waste.